MINIMETER CONFIGURATIONS

MODELS AC AMMETER APPLICATION RANGE DISPLAY CONNECTS
LM5
LM4-LM8
in-production
Self-Powered
AC Load Metering
Uses standard external C.T.s
for metering very high currents.
May be factory trimmed for 4, 5, 6, 7, 8 Amps F.S.
0 to 5 Amps
50/60Hz
LM15
LM12-LM16
in-production
Self-Powered
AC Load Metering
North America
C-UL certified
May be factory trimmed for 12, 15, 16 Amps F.S.
0 to 15 Amps
50/60Hz
LM15i
LM12i-LM16i
in-production
Self-Powered
AC Load Metering
EC/International
useful for 12 and 16 Amp circuits. Meets IEC1010
May be factory trimmed for 12, 15, 16 Amps F.S.
0 to 15 Amps
50/60Hz
LM20
LM18-LM25
in-production
Self-Powered
AC Load Metering
North America
May be factory trimmed for 18, 20, 25 Amps F.S.
0 to 20 Amps
50/60Hz
LM30
preliminary
Self-Powered
AC Load Metering
North America
May be factory trimmed for 27, 30, 33 Amps F.S.
0 to 30 Amps
50/60Hz
MODELS AC VOLTAGE APPLICATION RANGE DISPLAY CONNECTS
VM120
in-production
120VAC Line Metering
green at 117 +/- 12% typical
Self-Powered
50VAC to 155VAC
60Hz
VM200
VM230

(prelim)
both 200VAC and 208VAC Line Metering
230VAC Line Metering
Self-Powered
180VAC to 265VAC
60Hz
VM220i
VM240i

(prelim)
220VAC Line Metering
230VAC Line Metering
Self-Powered EC/International
180VAC to 265VAC
50/60Hz
MODELS DC VOLTAGE APPLICATION RANGE DISPLAY CONNECTS
DC12V
(prelim)
Self-Powered
12VDC Battery Voltage
Auto and Marine use
Senses either polarity
8VDC to 16VDC
fast action
green at 11.5 to 13.8
DC24V
(prelim)
Self-Powered
24VDC Battery Voltage
Telecommunications power
Senses either polarity
15VDC to 32VDC
fast action
green at 24 to 27.6
DC48V
(prelim)
Self-Powered
48VDC Battery Voltage
Telecommunications power
Senses either polarity
42VDC to 62VDC
fast action
MODELS DC AMMETER APPLICATION RANGE DISPLAY CONNECTS
EH20A
(prelim)
Uses Internal 20A Sensor
Isolated
External 5VDC +/- 5% required
Provides Analog Output for external data acquisition
Sig. levels 2.5VDC +/- 2.0V = 10Amps/Volt
0 to +/- 20A
EX50MV
EX100MV

(prelim)
Use External 50mV Shunt
Use External 100mV Shunt

Isolated
External VDC required
0 to -50mV
0 to -100mV
DC02AISO
DC05AISO
DC10AISO

(prelim)
Built-in Shunt
Isolated
External VDC required
0 to 2 Amps
0 to 5 Amps
0 to 10 Amps
DC02AN
DC05AN
DC10AN

(prelim)
Built-in Shunt
NON-Isolated
Requires external 7 to 12 VDC
Shunt connected to RTN
Load RTN is always more positive than RTN
0 to 2 Amps
0 to 5 Amps
0 to 10 Amps
MODELS SENSOR APPLICATION RANGE DISPLAY CONNECTS
TM100
(prelim)
Requires external 12VDC (+/-10%)
Low Cost Remote Temperature sensing
uses 100 Ohm NTC resistor
Remote Sense
below 0C to +100C
Typical increment accuracy is within 10% of range for all meters